[Oct 17,2015][L 5.1.1][ CM12.1][SLIMLP][Unofficial] Kernel 3.0.101 [ION]

Search This thread

macs18max

Senior Member
Apr 3, 2010
1,089
3,493
attachment.php


Bringing to you CM12.1 and SLIMLP 5.1.1. This is an unofficial ROM which is built from source by merging Evervolvs Legacy code and HD2 related files.




Credits:
CM TEAM and SLIM TEAM for the amazing features and allowing me to build the rom.
EVERVOLV TEAM for the legacy codes.
marc1706, Tytung, Sportsstar89, Securecrt, Xylograph, ph03n!x, datagr, Rick_1995, Daekin, BSDgeek_Jake
texasice, marco.palumbi, Robbie-P, PixelFreak, chautruongthinh, Nikez for all HD2 kernels, libs, mods, corrections
azam, gilbert, spezi , elginsk8r , Kirmaniarslan, , legacyxperia, christian, onell, philipped346, Robbie-P



Working:
Display
Audio/heaphone
Phone/data
Wifi/Wifi tether
Camera /Flash Light (little laggy)
Camcorder (software encoded, little laggy)
Mass storage
MTP
adb
Media playback (software encoded)



Bugs:
Bluetooth / Bluetooth tethering (Not tested yet tested so I dont know if it works)
Usb tether (Not tested yet)



Download:
| 2015-09-29 | CM12.1 ROM Dev-Host
| 2015-10-17 | SlimLP ROM Dev-Host
| 2015-09-22 | NativeSD Recovery Google drive



Source on Github
Kernel
Device
Display
Audio
Media


 
Last edited:

macs18max

Senior Member
Apr 3, 2010
1,089
3,493
Installation Instruction:

1. You need MAGLDR installed
2. Use NativeSD RECOVERY by downloading and extracting the folder name "recovery" into your sdcard. Then in MAGLDR, Choose boot folder as "recovery" in "Services > BootSettings > AD SD Dir".... Then Boot "AD SD"
3. You need a sdcard with 2 sd-ext partitions. You can create using recovery or laptop. There are lot of tutorial may not be exact
Installation video by onell http://xdaforums.com/showpost.php?p=62279769&postcount=563
Installation video by intoSmartphones Toderici https://www.youtube.com/watch?v=4mj_pgtlXC8

You can use ext4 or f2fs. But you should make sure that both partitions are of the same format.
Which mean if sdext is ext4 then sd-ext2 also should be ext4. ---OR--- if sdext is f2fs then sd-ext2 also should be f2fs.
If you had additional swap or sdext3 partition, no problem, it will not interfere with the ROM. No need to remove addtional partition swap or sd-ext if any exist.
4. Reboot to recovery again..
5. Now copy the zip to the ROM and Install the ROM
6. Reboot to MAGDLR
7. Choose boot folder as NativeSD folder in MAGLDR > Services > BootSettings > AD SD Dir
8. Boot AD SD (Boot time take 20 mins... )
9. You can install both ROM (Like NativeSD ROM ) as ROM install in separate folder.

Tips:
With GAPPS the ROM runs very slow due to Low RAM.. Install Gapps only if needed..
Once ROM has booted and you see the setup screen, wait 3 mins before you move further to setup.
Setting up ROM initially is very slow, but after half hour, it will come to a decent speed.
Solve black screen during call issue
I also found settings/sounds/interruptions/priority-interruptions/calls was not selected by default. After selecting, there appears to be no delay (when receiving calls) between when you hear the ringing tone on the calling phone and when I hear my phone ringtone, The screen wakes up after a couple of seconds ok and I can answer from the lockscreen, so hopefully no more missed calls.:fingers-crossed::good:

Logs:
Oct 17 2015
Updated Slimrom with zram
Sep 22 2015
Compiled kernel with Sabermod 5.2 toolchain
Fixed flashlight. Flashlight now stays on when screen off.
Upstream update CM
Sep 22 2015
Remove JustArchi optimization
Supported DirectSD. Multiple ROM installation.
Remove swap/zram
Added Lspeed tweaks. credit to Paget96
Reduce ION_SF and ADSP
Update Slim and CM's
Jul 5 2015
Fixed flashlight
Fixed adb
Added Nitro X Omega Mod to CM and SlimROM | credit: k1ks
JustArchi 's for CM12.1 | credits: JustArchi
Fix headphone (cm fix)
Fixed Software encoder/decoder
Fixed Camera
Initial Release 31 Dec 2014
Fixed Audio and Display/ Booted ROM
 
Last edited:

werty100

Senior Member
Aug 31, 2011
828
679
[Dec 31,2014][L 5.0.2][ CM12][Unofficial-Alpha] Kernel 3.0.101 [ION]

All mt problems where solve installing clk 1.5.1.1
Now its is booting

Here it is a recovery flaseable zip for updating recovery to 2.8.1
http://www.mediafire.com/download/7z7chehv4qmmlyl/TWRP2.8.1.zip

At the moment it is in cyanogenmod screen i will wiat longer i am ready with logcat but at the moment no adb conection

A lot more fo 20min and nothing happens puff removed battery and try again
2 mins take to boot or less after removing battery umm so extrange
Traying to unlock device causes reboot to bootanimation bootloop
Bluetooth is working awesome after enabling it crashes and reboot and bluetooth work problem is with new bluettooth stuff bluetooth share
7a5e9af43077a749ca4453223ef0ba11.jpg
70db11db082d4ecdfd44349a4f36096d.jpg
04625adf41f0e5328e50c700d856f1a0.jpg
 
Last edited:

aazzam16661

Senior Member
Aug 22, 2012
442
593
24
Gombak, Selangor

Robbie P

Senior Member
Feb 8, 2011
5,116
4,017
London
I have it booting, it reboots frequently as in OP. First boot took 40 mins then rebooted from lockscreen (unless I missed a previous reboot)
Looks great though
 
  • Like
Reactions: mosi hd2

werty100

Senior Member
Aug 31, 2011
828
679
LOGCAT

Netd:
I/Netd ( 95): Netd 1.0 starting
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/default/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/lo/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/dummy0/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet0/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet1/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet2/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet3/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet4/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet5/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet6/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet7/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/sit0/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/accept_ra_rt_table: No such file or directory


Cutils-trace:
E/cutils-trace( 564): Error opening trace file: No such file or directory (2)

First boot is compiling apps or what happens:
W/dex2oat ( 677): Verification of com.android.internal.telephony.uicc.UiccCard com.android.phone.CardStateMonitor.getUiccCard(int) took 141.690ms
W/dex2oat ( 677): Compilation of com.android.phone.Constants$CallStatusCode com.android.phone.CallController.placeCallInternal(android.content.Intent) took 101.285ms
W/dex2oat ( 677): Compilation of void com.android.phone.CallFeaturesSetting.onResume() took 129.410ms
W/dex2oat ( 677): Compilation of boolean com.android.phone.CellBroadcastSms.onPreferenceTreeClick(android.preference.PreferenceScreen, android.preference.Preference) took 102.535ms
W/dex2oat ( 677): Compilation of void com.android.phone.PhoneInterfaceManager$MainThreadHandler.handleMessage(android.os.Message) took 253.123ms
 

aazzam16661

Senior Member
Aug 22, 2012
442
593
24
Gombak, Selangor
Netd:
I/Netd ( 95): Netd 1.0 starting
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/default/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/lo/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/dummy0/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet0/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet1/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet2/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet3/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet4/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet5/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet6/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/rmnet7/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/sit0/accept_ra_rt_table: No such file or directory
E/Netd ( 95): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/accept_ra_rt_table: No such file or directory


Cutils-trace:
E/cutils-trace( 564): Error opening trace file: No such file or directory (2)

First boot is compiling apps or what happens:
W/dex2oat ( 677): Verification of com.android.internal.telephony.uicc.UiccCard com.android.phone.CardStateMonitor.getUiccCard(int) took 141.690ms
W/dex2oat ( 677): Compilation of com.android.phone.Constants$CallStatusCode com.android.phone.CallController.placeCallInternal(android.content.Intent) took 101.285ms
W/dex2oat ( 677): Compilation of void com.android.phone.CallFeaturesSetting.onResume() took 129.410ms
W/dex2oat ( 677): Compilation of boolean com.android.phone.CellBroadcastSms.onPreferenceTreeClick(android.preference.PreferenceScreen, android.preference.Preference) took 102.535ms
W/dex2oat ( 677): Compilation of void com.android.phone.PhoneInterfaceManager$MainThreadHandler.handleMessage(android.os.Message) took 253.123ms

All of this is normal ;)
 

Robbie P

Senior Member
Feb 8, 2011
5,116
4,017
London
can't get a logcat, adb not working (windose) and any terminal apk I install FCs.
Bluetooth works, it took a few tries to pair, music plays ok but sound is choppy when the phone is doing something else. Sound from speaker sounds good.
 

zenida

Senior Member
Jan 25, 2010
196
14
Cetraro
astragonia.altervista.org
Well I can't believe lollipop on HD2.. It's really immortal!

Anyway, do you think we need to update twrp source base? Or the latest release for HD2 is enough to avoid problems?

Inviato dal mio Nexus 4
 

Top Liked Posts

  • There are no posts matching your filters.
  • 158
    attachment.php


    Bringing to you CM12.1 and SLIMLP 5.1.1. This is an unofficial ROM which is built from source by merging Evervolvs Legacy code and HD2 related files.




    Credits:
    CM TEAM and SLIM TEAM for the amazing features and allowing me to build the rom.
    EVERVOLV TEAM for the legacy codes.
    marc1706, Tytung, Sportsstar89, Securecrt, Xylograph, ph03n!x, datagr, Rick_1995, Daekin, BSDgeek_Jake
    texasice, marco.palumbi, Robbie-P, PixelFreak, chautruongthinh, Nikez for all HD2 kernels, libs, mods, corrections
    azam, gilbert, spezi , elginsk8r , Kirmaniarslan, , legacyxperia, christian, onell, philipped346, Robbie-P



    Working:
    Display
    Audio/heaphone
    Phone/data
    Wifi/Wifi tether
    Camera /Flash Light (little laggy)
    Camcorder (software encoded, little laggy)
    Mass storage
    MTP
    adb
    Media playback (software encoded)



    Bugs:
    Bluetooth / Bluetooth tethering (Not tested yet tested so I dont know if it works)
    Usb tether (Not tested yet)



    Download:
    | 2015-09-29 | CM12.1 ROM Dev-Host
    | 2015-10-17 | SlimLP ROM Dev-Host
    | 2015-09-22 | NativeSD Recovery Google drive



    Source on Github
    Kernel
    Device
    Display
    Audio
    Media


    41
    Installation Instruction:

    1. You need MAGLDR installed
    2. Use NativeSD RECOVERY by downloading and extracting the folder name "recovery" into your sdcard. Then in MAGLDR, Choose boot folder as "recovery" in "Services > BootSettings > AD SD Dir".... Then Boot "AD SD"
    3. You need a sdcard with 2 sd-ext partitions. You can create using recovery or laptop. There are lot of tutorial may not be exact
    Installation video by onell http://xdaforums.com/showpost.php?p=62279769&postcount=563
    Installation video by intoSmartphones Toderici https://www.youtube.com/watch?v=4mj_pgtlXC8

    You can use ext4 or f2fs. But you should make sure that both partitions are of the same format.
    Which mean if sdext is ext4 then sd-ext2 also should be ext4. ---OR--- if sdext is f2fs then sd-ext2 also should be f2fs.
    If you had additional swap or sdext3 partition, no problem, it will not interfere with the ROM. No need to remove addtional partition swap or sd-ext if any exist.
    4. Reboot to recovery again..
    5. Now copy the zip to the ROM and Install the ROM
    6. Reboot to MAGDLR
    7. Choose boot folder as NativeSD folder in MAGLDR > Services > BootSettings > AD SD Dir
    8. Boot AD SD (Boot time take 20 mins... )
    9. You can install both ROM (Like NativeSD ROM ) as ROM install in separate folder.

    Tips:
    With GAPPS the ROM runs very slow due to Low RAM.. Install Gapps only if needed..
    Once ROM has booted and you see the setup screen, wait 3 mins before you move further to setup.
    Setting up ROM initially is very slow, but after half hour, it will come to a decent speed.
    Solve black screen during call issue
    I also found settings/sounds/interruptions/priority-interruptions/calls was not selected by default. After selecting, there appears to be no delay (when receiving calls) between when you hear the ringing tone on the calling phone and when I hear my phone ringtone, The screen wakes up after a couple of seconds ok and I can answer from the lockscreen, so hopefully no more missed calls.:fingers-crossed::good:

    Logs:
    Oct 17 2015
    Updated Slimrom with zram
    Sep 22 2015
    Compiled kernel with Sabermod 5.2 toolchain
    Fixed flashlight. Flashlight now stays on when screen off.
    Upstream update CM
    Sep 22 2015
    Remove JustArchi optimization
    Supported DirectSD. Multiple ROM installation.
    Remove swap/zram
    Added Lspeed tweaks. credit to Paget96
    Reduce ION_SF and ADSP
    Update Slim and CM's
    Jul 5 2015
    Fixed flashlight
    Fixed adb
    Added Nitro X Omega Mod to CM and SlimROM | credit: k1ks
    JustArchi 's for CM12.1 | credits: JustArchi
    Fix headphone (cm fix)
    Fixed Software encoder/decoder
    Fixed Camera
    Initial Release 31 Dec 2014
    Fixed Audio and Display/ Booted ROM
    13
    OK. Guys I havent updated the main page but if someone wants to install and play around with CM12.1 you will find it in xda download section of this thread
    ROM
    http://xdaforums.com/devdb/project/dl/?id=12132
    Kernel(to be place in sdcard)
    http://xdaforums.com/devdb/project/dl/?id=12131

    Brief instuction.
    You need MAGLDR and class10 2 sd-ext partitions(EXT4).
    You need to install the recovery in OP.
    Download and copy ROM into sdcard and install via recovery
    Download sdcard.zip and extract the NativeSD folder in your sdcard.

    In Magldr Change ADSD directory to NativeSD and boot into ADSD

    Check whats working / whats not and report.
    Note first boot take around 30 mins
    11
    Here is an update cm12.1 for testing
    http://d-h.st/GuU2

    --Changed ioscheduler to bfq as CM team has done some optimisation in the ROM with bfq and claim it performs well.
    --Updated kernel with latest bfq
    --Reduce ION_SF heap and ADSP heap
    --Fully odex rom. size is a huge though 500MB+ (Sorry but boots faster)
    --Removed any swap or zram scripts. I have observed that even when using swap or zram only 3MB is used most of the time. Only once it shot to 5MB. (tested using "adb shell free" command)
    --Lspeed tweak. http://xdaforums.com/android/software-hacking/tweak-l-speed-v1-0-02-02-2015-t3020138
    I have added few of LSpeeds script, As one drawback in our recovery is that users cannot flash other installer such as mods, tweak, hacks in our device we use in our recovery system and data is mounted on custom folders and not partitions. So I hope @Paget96 wont mind me directly using his script in the ROM.


    Requirement. Need 2 SD-ext partition (ext4 or f2fs). But It is compulsary that both partition are same. For example
    if sd-ext is ext4 than sd-ext2 should also be ext4
    or
    if sd-ext is f2fs than sd-ext2 should also be f2fs.
    If you have additional partition, (swap or sd-ext) no need to repartition as it will not interfere with the ROM.
    10
    comrades, whether to continue the work on the development?

    Yes. I did compile 5.1 data, wifi, works. But the ROM is a bit slower than Kitkat and battery drain is still not fixed.

    I am really busy in life now, but sometimes when I have a free weekend, I just compile and try to fix stuff.

    Also just another note, In future release I will not support cLK bootloader and/pr NativeSD.
    Only directsd and data2ext with magldr bootloader